7
I . Temperature / time display
J. Control light - (Shake)
Programs:
1. Default setting
2. Chicken wings
3. Steak
4. Fish
5. Shrimp
6. French fries
7. Muffins
8. tart
9. Bacon
Before first use.
1. Remove the packaging and any stickers and accessories that are on the outside and inside the unit.
2. The container holder can be removed to install it follows Figure 1
3. Thoroughly clean the container (2) and the grate (6) with hot water with a small amount of dishwashing
liquid and a sponge, and then wipe them with a clean, soft cloth.
Do not clean the appliance, abrasive cloths or sponges, or use scouring powders, as they can damage the
smooth non-stick surfaces of the container (2) and the grate (6).
4. Place the unit on a stable horizontal heat-resistant surface, connect the power cord (8).
5. To remove factory odors from the unit, turn on the unit by pressing the button (B) on the auxiliary panel,
then press the button (A) the unit will turn on on the default program.
6. When the program is finished, unplug the power cord and repeat step 2 to clean it again after it has
cooled down completely.
Do not wash the container (2) and the grate (6) in the dishwasher.
Use of the appliance:
1. Holding the handle (3), pull the container (2) together with the grate (6) from the housing (5) and place on
a stable surface.
2. The grate (6) can be removed from the container (2)
3. Place the previously prepared products on the grate (6) located on the bottom of the container (2). Then
insert the container (2) into the housing (5). When filling the container, do not exceed the MAX level placed
inside the container.
4. Connect the closed device to a grounded power outlet.
5. The device will turn on and emit a beep and go into standby mode. Press the ON / OFF button (B) to turn
on the device.
6. Using the function selection button (C) "Function", select the desired program (see description of
programs). Once the program is selected, you can change the temperature and time by pressing the
temperature / time control selection button (D), followed by the F "+", E "-" button. It is recommended to add
3 minutes to the cooking time, relative to the programmed menu, if the device is cooled.
7. After selecting the desired program, press the button (A) "start / pause". The indicator light (E) will start
flashing and the display will alternate between time and temperature.
8. The device is equipped with an interior light, which can be turned on by pressing the button (G), the light
will go out after 30 seconds.
9. The device has a function that informs about the recommendation to stir the prepared food. With selected
programs (see description of programs) after half of the programmed time, a beep will sound and the
display will show the information (SHAKE), then holding the handle (3) slide the container (2) together with
the grate (6) out of the housing (5) and stir the food. Then slide the container back into the appliance.
10. When finished, the device will cool the heater for 20 seconds, after which it will beep 5 times.
11. Press the (B) "ON / OFF" button to terminate the unit early.
It is possible to turn on the device without selecting a program, for this purpose, after turning on the device
and pressing the button (B) on the auxiliary panel, press the button (A), the device will turn on to the default
time and temperature parameters.
Приклучете се во разговорот за овој производ
Тука можете да го споделите вашето мислење за Camry CR 6319 Апарат за пржење. Ако имате прашања, најпрво прочитајте го прирачникот. Можете да побарате прирачник ако го употребите нашиот прирачник за контакт.