7
Accessories: A. Funnel × 1 B. Measuring cup × 1 C. Towel set × 1 D. Flat brush × 1 E. Large nozzle × 1 F. Extension hose × 1 G.
Nylon brush × 1 H. Stainless steel brush × 1 I. Floor brush x 1 J. Floor brush connector x1 K. Extension tube x 3 L. Floor brush
towel x1
NOTE: - First, check in an invisible place whether the material you intend to clean is suitable for steam cleaning, such as:
Steam can cause fading of varnished wood or leather.
Unprotected wood may swell.
Steam can remove protective layers of wax.
Plastics may stain when exposed to steam.
Soft plastics may deform when exposed to steam.
Cold glass or mirror surfaces may crack when exposed to hot steam.
- Never fill a steam cleaner with liquids other than water.
- Never put the steam washer or individual parts in the dishwasher. They would be damaged.
- Stop using the steam washer if its plastic parts show cracks, dents or are deformed. Replace damaged parts only with suitable
original replacement parts.
- Do not use the steam cleaner with an empty tank. When the water tank is exhausted, pull the mains plug to avoid overheating.
- When wishing to clean windows, warm them up first, such as by applying steam to a larger area from a greater distance and then
from a closer distance.
- Wear gloves, safety glasses and respiratory protection when attempting to remove hazardous substances.
Before first use:
Remove all packaging materials and stickers from the device. Clean the device with a clean and damp cloth. Open the device by
turning the safety nut (1) to the left. Fill with water and pour out the water. This will remove all residue and factory dirt from inside
the device. Then continue normal operation.
Usage:
1. Place the steam cleaner on a dry and flat surface and open the safety plug (1). To do this, press the cap down firmly and turn it
counterclockwise.
2. Use the measuring cup (B) and funnel (A) to fill the device with water. The maximum capacity is 400 ml. We suggest filling to 350
ml for better performance and higher steam production. If there is more than 350 ml in the tank, the steam may contain some water
for the first 2 minutes of use.
Special Notes:
Please use clean water (small solid particles may block the pipe or cause the machine to fail)
If the tap water in your area is hard or very hard, we suggest using a mixture of tap water and distilled water.
Please do not pour less than 150 ml of water.
3. Close the cap by turning it clockwise.
4. Insert the power plug into the electrical outlet. A red light will illuminate to indicate heating.
5. When the green light comes on, the device is ready for use. Note that the red light will turn on and off during operation. Please
use only when the green light is on. Otherwise, hot water will drip and splash from the device.
6. Turn the child lock (6) to the on position. Then press the steam trigger (7). Steam will start coming out of the device. Remember
to always press the steam trigger (7), after releasing the steam trigger (7) the child lock (6) will return to the off position.
When you have finished working or when the water tank is emptied:
After finishing work:
1. Disconnect the device from the mains power supply.
2. Press the steam trigger (7) and keep it pressed until steam stops producing.
3. Wait for the device to cool down for about 12-20 minutes, depending on the amount of steam remaining inside.
4. Slowly unscrew the safety cap (1) and wait a few minutes for the moisture to escape from the device.
If there is no more water in the tank, the device will stop producing steam. The water must be refilled. To do this, follow the steps
below:
Re-fill the tank:
1. Disconnect the device from the mains power supply.
Приклучете се во разговорот за овој производ
Тука можете да го споделите вашето мислење за Adler AD 7038 Чистач на пареа. Ако имате прашања, најпрво прочитајте го прирачникот. Можете да побарате прирачник ако го употребите нашиот прирачник за контакт.