Прирачник Skil 8600 AA Дувалка за лисја

Прирачник

7

b) Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or

remove the battery pack, if detachable, from the

power tool before making any adjustments,

changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean and

free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

5) SERVICE

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

ADDITIONAL SAFETY WARNINGS

PERSONAL SAFETY

• Never blow debris in the direction of bystanders

• Do not blow and vacuum materials that are

hazardous to one’s health (such as dust from beech or

oak wood, masonry dust, asbestos)

• The noise level when working can exceed 85 dB(A); wear

ear protection

• Wear a dust mask when working in a dusty environment

• Always disconnect plug from power source during work

breaks or before cleaning, maintenance, making

adjustments and changing accessories, in order to

reduce the risk of starting the tool accidentally

ELECTRICAL SAFETY

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool

• Do not blow and vacuum liquids (the penetration of

liquids increases the risk of an electric shock)

• Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

• Always switch o tool and disconnect plug from power

source if the power supply cord or the extension cord is

cut, damaged or entangled (do not touch the cord

before disconnecting the plug)

• Never use the tool when cord is damaged; have it

replaced by a qualied person

BEFORE USE

• Check the functioning of the tool before each use and, in

case of a defect, have it repaired immediately by a

qualied person; never open the tool yourself

• When vacuuming, never use the tool without the dustbag

in place

• Regularly check the dustbag for wear or damage

DURING USE

• Always keep the cord away from moving parts of the tool;

direct the cord to the rear, away from the tool

• Always ensure that the ventilation openings are kept clear

of debris

• In case of electrical or mechanical malfunction,

immediately switch o the tool and disconnect the plug

EXPLANATION OF SYMBOLS ON TOOL

3 Read the instruction manual before use

4 Wear protective glasses

5 Double insulation (no earth wire required)

6 Do not dispose of the tool together with household waste

material

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut o the cord of this tool,

it must be disposed of safely and not left unattended

USE

• On/o

- switch on the tool by pulling trigger A

- lock the switch for continuous use by pressing button

B

- unlock the switch by pulling again trigger A and then

releasing it

- switch o the tool by releasing trigger A

! before switching on the tool, ensure that it is not

in contact with any object

! after switching off the tool the motor continues to

run for a few seconds

• Blowing 7

- insert tabs inside nozzle C into slots of air outlet D and

lock nozzle into place by turning it clockwise

! when blowing always ensure that air inlet E 2 is

kept clear of debris/impurities

• Vacuuming 8

- insert tabs inside nozzle C into slots of air inlet E and

lock nozzle into place by turning it clockwise

- do not vacuum sharp-edged or hot materials (such as

glass splinters, hot ash or metal chips)

! when vacuuming always mount dustbag F onto

air outlet D

- regularly empty dustbag F (the vacuum capacity

decreases considerably when the dustbag is full)

• Airow control (7 positions)

- turn wheel G upwards for increasing the air volume

- turn wheel G downwards for reducing the air volume

Оцена

Повеќе за овој прирачник

Разбираме дека е практично да имате печатен прирачник за Skil 8600 AA Дувалка за лисја. Секогаш можете да го преземете прирачникот од нашата интернет-страница и да го отпечатите сами. Ако сакате да го имате оригиналниот прирачник, ви препорачуваме да контактирате со Skil. Тие можеби ќе можат да ви дадат оригинален прирачник. Барате прирачник за вашите Skil 8600 AA Дувалка за лисја на различен јазик? Изберете го претпочитаниот јазик на нашата интернет-страница и пребарајте го бројот на модел за да видите дали го имаме.

Спецификации

Сите прирачници за Skil Дувалки за лисја
Повеќе прирачници за Дувалки за лисја

Поврзани производи

Прирачник

Skil 0795 AA Дувалка за лисја

Прирачник

Skil 3161 CB Дувалка за лисја

Прирачник

Skil 0330 CA Дувалка за лисја

Прирачник

Skil 0790 AA Дувалка за лисја

Прирачник

Skil 0796 AA Дувалка за лисја

Прирачник

Skil 0330 AC Дувалка за лисја

Прирачник

Skil 0380 CA Дувалка за лисја

Прирачник

Skil 0791 AA Дувалка за лисја

Поврзани категории