Прирачник Philips GC6804 Пегла

Прирачник

9

Cleaning the soleplate

To properly maintain your appliance, clean it regularly.

1 Clean the appliance with a moist cloth.

2 To easily and eectively remove stains, let the soleplate heat up and move the iron over a moist cloth (Fig. 21).

Tip: Clean the soleplate regularly to ensure smooth gliding.

Storage

1 Switch o the appliance and unplug it.

2 Pour the water out of the water tank into the sink (Fig. 22).

3 Fold the mains cord and water supply hose together. Push them into the storage compartment (Fig. 23).

4 For GC6819, GC6820, GC6830, and GC6840 series only: push the carry lock to lock the iron onto the iron platform

(Fig. 24). You can carry the appliance by the handle of the iron when it is locked onto the iron platform (Fig. 25).

Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to

solve the problem with the information below, visit www.philips.com/support for a list of frequently asked questions or

contact the Consumer Care Center in your country.

Problem Possible cause Solution

The iron does not produce

any steam.

There is not enough water in the

water tank.

Fill the water tank beyond the MIN indication.

Press and hold the steam trigger until steam

comes out. It may take up to 30 seconds until

steam comes out.

You did not press the steam trigger. Press and hold the steam trigger until steam

comes out.

The steam function has been

disabled until you have performed

the Calc-Clean process.

Perform the Calc-Clean process to restore the

steam function. (see chapter ' Cleaning and

maintenance')

At the start of your ironing session,

the steam trigger has not been

pressed long enough.

Press and hold the steam trigger until steam

comes out. It may take up to 30 seconds until

steam comes out.

The light of the CALC CLEAN

button ashes and the

appliance beeps.

This is the Calc-Clean reminder. Perform the Calc-Clean after the Calc-Clean

reminder is given (see chapter ‘Cleaning and

maintenance’).

No steam comes out of the

soleplate, the light of the

CALC CLEAN button ashes

and the appliance beeps.

You have not done or have not

completed the Calc-Clean process.

Perform the Calc-Clean process to enable the

steam function again (see chapter ‘Cleaning and

maintenance’).

The appliance has switched

o.

The auto shut-o function is

activated automatically. The

appliance enters the standby mode

if has not been used for 5 minutes

and swiches o if it has not been

used for another 10 minutes.

To activate the appliance again, press the on/o

button. The appliance starts to heat up again.

The appliance produces a

loud pumping sound.

The water tank is empty. Fill the water tank with water and press the

steam trigger until the pumping sound becomes

softer and steam comes out of the soleplate.

English

Оцена

Повеќе за овој прирачник

Разбираме дека е практично да имате печатен прирачник за Philips GC6804 Пегла. Секогаш можете да го преземете прирачникот од нашата интернет-страница и да го отпечатите сами. Ако сакате да го имате оригиналниот прирачник, ви препорачуваме да контактирате со Philips. Тие можеби ќе можат да ви дадат оригинален прирачник. Барате прирачник за вашите Philips GC6804 Пегла на различен јазик? Изберете го претпочитаниот јазик на нашата интернет-страница и пребарајте го бројот на модел за да видите дали го имаме.

Спецификации

Сите прирачници за Philips Пегли
Повеќе прирачници за Пегли

Поврзани производи

Прирачник

Philips GC3829 Пегла

Прирачник

Philips GC9620 Пегла

Прирачник

Philips PSG6066 PerfectCare Пегла

Прирачник

Philips HI5922 Пегла

Прирачник

Philips GC4554 Пегла

Прирачник

Philips DST1030 Пегла

Прирачник

Philips DST7011 Пегла

Прирачник

Philips DST7031 Пегла

Поврзани категории