6
Device description
1. kettle casing
2. on/off switch
3. indicator light
4. rotating base
5. lid
6. handle
7. cover opening button
Before you start using it
Fill the kettle with water to the Max level three times, boil it and pour it out. To remove any factory smell, boil the
water in the kettle several times.
1. Fill the kettle with water and check that the heating element is completely covered with water.
2. Place the base on a stable, flat and heat-resistant surface.
3. Plug the power cord into a 220-240V~50/60Hz power outlet and press the switch. The indicator light will come on.
4. Once the water boils, the kettle will turn off automatically.
5. Before removing the kettle from the base, check that it has been turned off.
6. To turn off the kettle before the water boils, press the switch. The indicator light will go out.
7. The kettle lid must be closed while boiling. Only then will the automatic switch-off function.
8. The kettle can be re-started approximately 2 minutes after it was last used.
9. Switching on an empty kettle or one that is not filled enough with enough water will automatically switch off the
device. In this case, wait a few minutes. Pour in the appropriate amount of water and switch the kettle on again.
10. Do not leave the kettle on unattended.
11. The kettle is an electrical device not intended for storing water or any other liquids. After boiling water, it should
be immediately poured into another container. Water after boiling in the kettle should not remain in it for longer than
10 minutes. Before each use, fill the kettle with fresh water above the minimum level and below the maximum level.
Cleaning and maintenance
The limescale that forms inside the kettle should be removed regularly. This is not covered by the warranty service.
Failure to descale regularly will damage the kettle and void the warranty. For descaling, use specially designed
products according to the instructions for use of the descaler. After descaling, rinse the kettle very thoroughly three
times.
Caution hot surface:
In the interest of the environment. Information on used electrical and electronic equipment In accordance with art. 13 sec. 1 and sec. 2
of the Act of 11 September 2015 on used electrical and electronic equipment, we inform you about the correct handling of waste electrical
and electronic equipment:
1. It is prohibited to place used electrical and electronic equipment together with other waste – this is confirmed by the marking in the form of
a "crossed-out bin", which requires selective collection of this type of waste.
2. Electrical and electronic devices may contain hazardous substances, mixtures and components which, when released into the environment,
may pose a serious threat to the health and life of humans and living organisms. They may lead to numerous health ailments, such as: vision,
hearing and speech disorders, and may also damage the kidneys, liver and heart, and cause skin diseases. Harmful substances may also have
an adverse effect on the respiratory and reproductive systems and lead to cancerous changes. Consumption of plants growing in contaminated
soils, and products made from them, may pose a risk of the above health effects.
3. Used electrical and electronic equipment should only be delivered to authorised collection points, a list of which should be available on the
Приклучете се во разговорот за овој производ
Тука можете да го споделите вашето мислење за Mesko MS 1353 Чајник. Ако имате прашања, најпрво прочитајте го прирачникот. Можете да побарате прирачник ако го употребите нашиот прирачник за контакт.