
7 / EN
Washing Machine / User’s Manual
A
warning: Your house will be flooded if the hose comes
out of its housing during water discharge. Moreover, there
is risk of scalding due to high washing temperatures!
To prevent such situations and to ensure smooth water
intake and discharge of the machine, fix the end of the
discharge hose tightly so that it cannot come out.
• Thehoseshouldbeattachedtoaheightofatleast40
cm,and100cmatmost.
• Incasethehoseiselevatedafterlayingitonthefloor
levelorclosetotheground(lessthan40cmabovethe
ground), water discharge becomes more difficult and the
laundry may come out excessively wet. Therefore, follow
the heights described in the figure.
• Topreventflowingofdirtywaterbackintothemachine
and to allow for easy discharge, do not immerse the hose
end into the dirty water or do not drive it in the drain more
than15cm.Ifitistoolong,cutitshort.
• Theendofthehoseshouldnotbebent,itshouldnotbe
stepped on and the hose must not be pinched between
the drain and the machine.
• Ifthelengthofthehoseistooshort,useitbyadding
anoriginalextensionhose.Lengthofthehosemay
notbelongerthan3.2m.Toavoidwaterleakfailures,
the connection between the extension hose and the
drain hose of the product must be fitted well with an
appropriate clamp as not to come off and leak.
2.6 Adjusting the feet
A
warning: Inordertoensurethattheproductoperates
more silently and vibration-free, it must stand level and
balanced on its feet. Balance the machine by adjusting
thefeet.Otherwise,theproductmaymovefromitsplace
and cause crushing and vibration problems.
1.Loosenthelocknutsonthefeetbyhand.
2.Adjustthefeetuntiltheproductstandsleveland
balanced.
3. Tighten all lock nuts again by hand.
A
warning: Do not use any tools to loosen the lock nuts.
Otherwise,theywillgetdamaged.
2.7 Electrical connection
Connecttheproducttoagroundedoutletprotectedbya16
Afuse.Ourcompanyshallnotbeliableforanydamages
that will arise when the product is used without grounding in
accordance with the local regulations.
• Connectionmustcomplywithnationalregulations.
• Powercableplugmustbewithineasyreachafter
installation.
• Ifthecurrentvalueofthefuseorbreakerinthehouseis
lessthan16Amps,haveaqualifiedelectricianinstalla
16Ampfuse.
• Thevoltagespecifiedinthe"Technicalspecifications"
section must be equal to your mains voltage.
• Donotmakeconnectionsviaextensioncablesormulti-
plugs.
B
warning: Damaged power cables must be replaced by
the Authorized Service Agents.
Transportation of the product
1.Unplugtheproductbeforetransportingit.
2.Removewaterdrainandwatersupplyconnections.
3. Drain all water that has remained in the product. (SEE
5.5)
4.Installtransportationsafetyboltsinthereverseorderof
removalprocedure;(SEE2.3)
C
Never move the product without the transportation safety
bolts properly fixed in place!
A
warning: Packagingmaterialsaredangerousto
children.
Keeppackagingmaterialsinasafeplaceawayfrom
reach of the children.
For metal feet:
1.Loosen the lock nuts on the feet by spanner.
2.Adjust the feet until the product stands in a stable
and balanced way.
3.Tighten all lock nuts by spanner again.
For plastic feet:
Приклучете се во разговорот за овој производ
Тука можете да го споделите вашето мислење за BEKO B1WFK2604WEE Машина за перење алишта. Ако имате прашања, најпрво прочитајте го прирачникот. Можете да побарате прирачник ако го употребите нашиот прирачник за контакт.
одговор | Ова беше корисно (0) (Преведено од Google)